Description
High Gloss Finish
Dazzle is a high gloss floor finish liquid. This product will not disappoint in terms of the results you will get and the ease in which you get the results. If you have high standards and equally high foot traffic, this is the floor finish you must try. You will reorder it.
Holds up to Frequent Burnishing
It has a unique combination of synthetic polymers. The importance of this formula is it produces a finish with the result it can hold up to frequent burnishing.
Easy Maintenance
Particularly, it is a glossy floor polish and formula for tile, vinyl, linoleum, or hardwood floors. Equally important, it is easy maintenance and upkeep and is scratch and scuff resistant by design.
Dries Fast
Ultimately, this high gloss floor finish reduces the number of restoration and recoating steps in your floor maintenance operations. Overall, it dries fast with an incredible “wet look” gloss. The fast-drying formula reduces labor cost and building down time. Its versatility of this product is important because it can be used in both spray buffing and burnishing operations.
For Use On:
- Tile
- Vinyl
- Linoleum
- Hardwood
Directions
Directions:
Complete directions on product label.
Apply at a rate of 1,850 square feet per gallon. Two coats are recommended for spray buffing, 4 coats are recommended for burnishing operations.
Maintenance:
Dust mop daily using Clear Attractions Dust Mop Treatment. Dirt and dust can abrade and scratch your finishes, destroying their natural luster.
Damp mop regularly with Excel Floor Cleaner. The highest gloss comes only from clean floors. Dirt acts as a barrier to light reflection, causing your floors to look dull and life-less.
Professional secrets to effective floor care:
To ensure your floor finish reaches its maximum gloss potential, always apply to floors with at least two coats of a floor seal. Maximum gloss can only be achieved on smooth, level floors. Floor sealers smooth out your floors’ surface imperfections to allow for maxi-mum light reflection.
Do not use your stripping or rinsing mop or bucket for the application of floor finishes. Al-ways start with a clean, previously wrung-out cotton/rayon mop and bucket. Save this mop and bucket just for the application of finish.
Always apply even, medium coats. To ensure the application of medium coats, wring out the bottom half of a fully saturated mop.
Discard unused finish. Pouring unused finish from your bucket back into the original container can spoil the good finish.
Only logged in customers who have purchased this product may leave a review.
Carpet Care/Floor Care
Reviews
There are no reviews yet.